Hi!
Hab den LG GSA-4163 Brenner und hab damit früher immer ohne Probleme 8x Rohlinge gebrannt, sowie CDs. Habe mir vor kurzem mahl 16x von tevion geholt. Nero bricht bei den Rohlingen jedoch immer am Anfang ab. Mit anderen Brennprogrammen und anderen 16x Rohlingen siehts genauso aus. Mit 8x klappts immernoch.
hab schon mehrere tips in anderen foren bekommen, die aber nicht wirklich zur lösung des problems führen.
hab von pio auf udma-2 umgstellt. aber nur im geräte-manager nicht im bios.
firmware, brennprogramm, chipsatztreiber geupdatet bzw. aktualisiert.
brenndienst deaktiviert und aktualisert....
jedesmal wenn ich was verändere klappt meißtens die erste daten dvd die ich brenne, wobei es auch da sehr lange dauert bis der brenner loslegt. das dvd kopieren oder ähnliches klappt gar nicht.
hoffe mir kann jemand helfen.
ich hänge den log bericht an.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'G:\Programme\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1912>Version: TM00 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ExcelStor Technology J880 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1912 nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1912 E: CDRom0
HL-DT-ST DVDRAM GSA-4163B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
BUFE : 0
Physical memory : 223MB (228848kB)
Free physical memory: 99MB (102068kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.12.2006
ISO Zusammenstellung
21:01:52 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:01:52 #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:01:52 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
21:01:52 #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
21:01:53 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2258655 (501:55.30, 4411MB)
21:01:53 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
21:01:53 #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
21:01:53 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:01:53 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2258656 (2258656) = #2258656/501:55.31
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258656 blocks [F: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
21:01:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4625727488, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep_________
_
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2258656 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2258656 | 0 | 0x00
2258656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
21:01:53 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
21:01:53 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
21:01:53 #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
21:01:53 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
21:01:53 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 8x (11.080 KB/s)
21:01:53 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:01:53 #17 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
21:01:53 #18 Text 0 File DVDR.cpp, Line 6251
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
21:01:53 #19 CDR -1207 File DVDR.cpp, Line 6174
Book Type automatically set to: DVD-ROM
21:01:53 #20 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
21:02:50 #21 SPTI -1039 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 00 00 01 BB 40 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 35 01 00 0E 09 01
Buffer x0c5b3040: Len x10000
0xE9 EA 54 C8 C6 CC 84 E3 FF E0 AF AB D3 6A E2 7A
0x38 20 4A 6A 7E DF 6D F7 80 FD F7 AD F4 64 0F DE
0x78 AC 67 AA CB FE 3C 1E E6 C9 97 00 D4 4D 17 1A
21:02:50 #22 CDR -1039 File Writer.cpp, Line 299
Focus or tracking error
F: HL-DT-ST DVDRAM GSA-4163B
21:02:50 #23 SPTI -1039 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 10 35 01 00 0E 09 01
21:02:50 #24 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders
21:02:51 #25 CDR -1039 File WriterStatus.cpp, Line 162
Focus or tracking error
F: HL-DT-ST DVDRAM GSA-4163B
21:02:51 #26 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
21:02:52 #27 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 8x (11.080 KB/s)
21:02:52 #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:03:00 #29 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
21:03:00 #30 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.05.2006 22
24
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.05.2006 21
54 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hab den LG GSA-4163 Brenner und hab damit früher immer ohne Probleme 8x Rohlinge gebrannt, sowie CDs. Habe mir vor kurzem mahl 16x von tevion geholt. Nero bricht bei den Rohlingen jedoch immer am Anfang ab. Mit anderen Brennprogrammen und anderen 16x Rohlingen siehts genauso aus. Mit 8x klappts immernoch.
hab schon mehrere tips in anderen foren bekommen, die aber nicht wirklich zur lösung des problems führen.
hab von pio auf udma-2 umgstellt. aber nur im geräte-manager nicht im bios.
firmware, brennprogramm, chipsatztreiber geupdatet bzw. aktualisiert.
brenndienst deaktiviert und aktualisert....
jedesmal wenn ich was verändere klappt meißtens die erste daten dvd die ich brenne, wobei es auch da sehr lange dauert bis der brenner loslegt. das dvd kopieren oder ähnliches klappt gar nicht.
hoffe mir kann jemand helfen.
ich hänge den log bericht an.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'G:\Programme\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 1 TA 1 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1912>Version: TM00 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ExcelStor Technology J880 nvatabus Port 0 ID 0 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1912 nvatabus Port 0 ID 2 DMA: Off
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B nvatabus Port 0 ID 3 DMA: Off
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1912 E: CDRom0
HL-DT-ST DVDRAM GSA-4163B F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 36700160 (0) Byte
BUFE : 0
Physical memory : 223MB (228848kB)
Free physical memory: 99MB (102068kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.12.2006
ISO Zusammenstellung
21:01:52 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
21:01:52 #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
21:01:52 #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)
21:01:52 #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
21:01:53 #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2258655 (501:55.30, 4411MB)
21:01:53 #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO
21:01:53 #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
21:01:53 #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
21:01:53 #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2258656 (2258656) = #2258656/501:55.31
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258656 blocks [F: HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
21:01:53 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4625727488, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep_________
_
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2258656 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2258656 | 0 | 0x00
2258656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
21:01:53 #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
21:01:53 #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started
21:01:53 #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.
21:01:53 #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed
21:01:53 #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 8x (11.080 KB/s)
21:01:53 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
21:01:53 #17 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
21:01:53 #18 Text 0 File DVDR.cpp, Line 6251
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
21:01:53 #19 CDR -1207 File DVDR.cpp, Line 6174
Book Type automatically set to: DVD-ROM
21:01:53 #20 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
21:02:50 #21 SPTI -1039 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 00 00 01 BB 40 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 35 01 00 0E 09 01
Buffer x0c5b3040: Len x10000
0xE9 EA 54 C8 C6 CC 84 E3 FF E0 AF AB D3 6A E2 7A
0x38 20 4A 6A 7E DF 6D F7 80 FD F7 AD F4 64 0F DE
0x78 AC 67 AA CB FE 3C 1E E6 C9 97 00 D4 4D 17 1A
21:02:50 #22 CDR -1039 File Writer.cpp, Line 299
Focus or tracking error
F: HL-DT-ST DVDRAM GSA-4163B
21:02:50 #23 SPTI -1039 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 10 35 01 00 0E 09 01
21:02:50 #24 Phase 127 File dlgbrnst.cpp, Line 1746
Generating DVD high compatibility borders
21:02:51 #25 CDR -1039 File WriterStatus.cpp, Line 162
Focus or tracking error
F: HL-DT-ST DVDRAM GSA-4163B
21:02:51 #26 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
21:02:52 #27 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 8x (11.080 KB/s)
21:02:52 #28 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
21:03:00 #29 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
21:03:00 #30 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19.05.2006 22
24 File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 16.05.2006 21
54 (Prassi/Veritas driver for win 2K)Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)